Blackwoods Knows

PROSAFE Traffic Cones and Bollards

Written by PROSAFE | Sep 29, '23

PROSAFE offers a range of safety cones and bollards to suit most situations. The range has been designed for use in Australia and to meet the relevant Australian Standards. Reflective tape which features on PROSAFE products meets Class 400T requirements.

Safety cone requirements can vary between different Australian states and territories, and regulations and requirements can change over time. It is important to consult the most up-to-date sources for accurate and current information. The table below gives a general overview of safety cone usage requirements across Australia.

Safety Cones

 

Reflective Collars

Non-Reflective

Cone Height

Part Number

Suggested Usage

Part Number

Suggested Usage
(without reflective collars)

300mm

01656535

[Not for use on roads]
- Marking parking areas in dim lighting
- Improved visibility in low-light conditions

01656518

[Not for use on roads]
- Indoor areas or low-traffic zones
- Minor hazards or restricted access
- Pedestrian management at events

450mm

01656552

[Day / Night – Traffic speeds <60km/h]
- Most open road and built-up areas
- Improved visibility in low-light conditions

01656688

[Day time use only with Traffic speeds <60km/h]
- Footpath, shared paths and bicycle paths
- Alerting hazards and work zones
- Construction, Mining and General Industry

700mm

01656586

[Day / Night]
- Road applications at higher speeds
- Improved visibility in low-light conditions
- Effective for highways and major roads

01656569

[Day time use only]
- Footpath, shared paths and bicycle paths
- Alerting hazards and work zones
- Construction, Mining and General Industry

900mm

01656620

[Day / Night]
- Road applications at higher speeds
- Improved visibility in low-light conditions
- Effective for highways and major roads

01656603

[Day time use only]
- Footpath, shared paths and bicycle paths
- Alerting hazards and work zones
- Construction, Mining and General Industry

 

Bollards

Description

Part Number

Suggested Usage

STEM + 6kg

01656484

[Day / Night]
- Work zone safety and separation of traffic and pedestrians
- Improved visibility in low-light conditions

STEM + 8kg

01656637

STEM

01656654

 

Please note that this table provides a general overview of typical safety cone and bollard usage and is not exhaustive. The specific usage of traffic cones bollards can vary based on local regulations and the context of the roadwork or traffic management situation. Always refer to state and local regulations and guidelines for accurate and up-to-date information.

References

  • AS 1742.3:2019
  • AS 1906.1:2017
  • AGTTM Part 3 - Link here
  • NSW – “Traffic Control at Worksites" manual. Link Here

 

 

NEW PROSAFE CATALOGUE OUT NOW