In the industrial sector, there is a widespread issue concerning the on-site utilization of auxiliary power supplies (240V/415V) from Welder Generators. Different sites have varying requirements, especially in places like mines, quarries, and construction sites. Each of these locations has its specific rules that contractors must follow to gain approval for using their machines on-site.
Challenges
Because each site has its unique criteria, it can be quite frustrating for contractors who want to use an Engine Driven Welder/Generator. Unexpectedly finding out that your equipment setup isn't compliant can not only delay your current job but also impact future job opportunities with different site expectations.
One particularly vexing challenge for contractors is dealing with on-site auxiliary power supplies (240V/415V) from Engine Driven Welder Generators. These sites often focus on the use of 50Hz auxiliary power, which means contractors may need to make different modifications from one job to the next to meet each site's specific rules.
Contractors may be required to:
- Modify and install a lockup panel to ensure that the outlets are inaccessible.
- Remove the outlets from the machine entirely.
- Adjust outlets and power tool leads so that only site-approved 60Hz tools can be used.
Lincoln Electric has heard our customers' frustrations and consulted with industry experts to come up with a solution: the New AV600X Plus Engine Driven Welder/Generator. This solution meets the requirements of each site through a simple Lockable 50/60Hz switch. The site supervisor can hold the padlock key to ensure compliance is maintained.
Here's how it works:
- If the site requires 50Hz only, switch or padlock into the 50Hz setting to obtain 50Hz auxiliary output for most welding and gouging operations.
- If the site doesn't allow auxiliary power, switch or padlock into the 60Hz setting to get full welding output and fully isolate auxiliaries.
- If there are no site-specific requirements, you can select the speed you need: 50Hz (1500rpm) or 60Hz (1800rpm). Choosing the lower speed reduces fuel consumption, engine noise, and wear.
The AV600X Plus also offers other factory-fitted options, including a Bash/Roll Frame with an integrated Spill Tray, a securely mounted 9kg Fire Extinguisher, Earthing Electrode, and several standard features, including:
- Crosslinc Wireless remote control at the Feeder1.
- TVT (True Voltage Technology1. (Automatically compensates voltage drop in your cables)
- Voltage Reduction Device (VRD) meeting Mines requirements.
- Double Pole Battery Isolator.
- Insulation Mega Test easily performed.
Lincoln Electric has resolved the challenge of welding on various sites with the Air Vantage 600X PLUS 50Hz Engine Driven Welder/Generator.
Another concern with AIR PACK systems is compliance and inspection requirements for the compressor. These systems must adhere to multiple standards, including Australian Standards and Mining Safety & Inspection regulations. These standards categorize hazard levels from A to E, with E being the lowest level of control needed.
When selecting your machine, it's wise to opt for equipment with the lowest hazard level for safety reasons and to minimize inspection costs and downtime. The Air Vantage 600X Plus Compressor system is designed and rated at HAZARD LEVEL 'E,' ensuring your safety and reducing ongoing inspection expenses.
At Lincoln Electric, we pride ourselves on listening to our customers and providing solutions that meet their needs and expectations. We continually improve our products to enhance the experience for owners and operators. The New AV600X Plus includes numerous under-the-hood improvements to keep your operation running at peak performance.
Notes
1 Required a Lincoln X-Rated Feeder
